1. On-Line Dissolved Gas Analyzers: • Works on GC technology which is only Approved technology by IEEE,IEc,CIGRE. • Single gas, 3 gas and 9 Gas Analyzers. • Onsite Calibration Facility. • Avoid transformer failure. • High Accuracy of detection. • Defer capital expenditures. • Support all latest communication ports and protocols. • User Friendly TM VIEW software for analysis of results. • Analysis Tools such as Duval tringles, Roger’s ratio. • Dornenburg ratios, IEEE condition.

2. On-Line & Portable Partial Discharge Monitoring System:

PD Monitoring of Transformers/GIS/Cables:-
• Works on UHF principal which clearly differentiate between noise signal and PD Signal.
• Handy System for precise assessment of partial discharge during testing, commissioning and periodic inspections.
• Robust design allows for reliable operation in almost any environment.
• Flexible Installation options.
• IEC 61850 certified
• Full Characterization and localizations of PD faults to determine the severity of PD and help in scheduling maintenance.
• Accurate fault detection improves reliability of HV Testing.
• Usable for HV GIS commissioning tests.
• Retrofits to most major GIS and transformers.
• Analysis through advanced software.
• Accurate fault detection improves reliability of HV testing.



3. On-Line Fault Recording and Digital Recorders.

• Provide exact fault location to one tower – improved performance.
• Reduce downtime by getting to the fault faster.
• Best Accuracy to ± 60 meters independent of impedance methods.
• Track intermittent self clearing faults and focus maintenance at the right spot to prevent a major breakdown.
• Accurate results from circuit trips automatically available in the dispatch center within minutes of the event.
• Maintenance crews alerted by email notification.
• Supersedes the successful TWS Mark VI and DSFL devices.


4. Smart Breather for Transformer:

• Reduce maintenance costs with learned transformer breathing patterns and selfregenerating desiccant.
• Constructed with robust materials that provide models for almost any application.
• User customization through configurable or pre-programmed RH threshold.
• Local and remote communication options provide for any application.
• Bright LED indication lights and alarming capabilities indicate breather status.
• Standard models are designed for most applications and are offered in variety of sizes (1 kg, 2kg, 4kg) all carrying a 5 year warranty.



5. VLF Test Generator:
• Compact portable 36kV VLF test set.
• Easily transported by one or two persons.
• Simple Operation
• Menue-driven operation in English/German, multilingual option.
• Fully automatic test sequence
• Timer with automatic switch-off
• Breakdown detection
• Fault detection
• Direct high voltage measurement
• Protective earthing circuit
• Protective circuit/ indication in accordance with VDE 0104

6. Fault Path Indicator:
• Reduces downtimes
• Highest available sensitivity- shows faults from 0.5 A
• Shows the faulty phase on overhead lines.
• Live Line installation.
• Long life Lithium battery (10 years)
• Indication of the fault path 2 bright LEDS and COM (GSM/GPRS)
• Weather resistant (IP 67 and temperature)
• Suitable for all types of conductors



7. Smart Arrester i20z (SAi20z):
• Efficiency & cost savings
• Prevent insulator and conductor breakage
• Avoid outages on the line
• Protect sensitive components ( surge arresters, transformers, etc.)
• Avoid Short No grounding to adjust and control.
• No copper ground lead required
• Self-protected product
• No maintenance required
• Fix and forget ( 20 years life expectancy)
• One time investment for the line
• Higher reliability of the line circuits (follow current)
• INNOVATIVE TECHNOLOGY: EasyQuench is a unique technology able to protect OHL from lighting by discharging energy in the air. It requires NO additional product (ground lead, ground rod, etc.) EQ functions with the conductivity of the pole and cross arm.



8. HVIR Window:
• Dust and spatter –proof protection cap.
• Frame with honey grid protective cover and optical window.
• Outer bracing sealing joint.
• Inner self adhesive sealing joint
• Use from 0.4µm to 13 µm.
• UV sensitivity none
• Use in Temperature -40 ˚C to +70˚C.
9. ALL- in – one relay test Set:

• ALL-IN-ONE systems for electromechanical, electronic, and numerical protection relay testing.
• 800*600 touch sensitive LCD.
• High – Accuracy Voltage/ Current measurement input.
• Two three-channel bays for up to six voltage amplifier with independent neutral, reversible to current mode.
• 8 binary outputs software configurable relay or open collector modes.
10. Transformer Test Equipment:

• Transformer turn ratio meter 1 Phase & 3 Phase.
• Transformer winding ohm meter.
• TAP changer Analyzer & Winding ohmmeter.
• Three Phase Transformer Demagnetiser.
• High Accuracy, fully automatic, true RMS measurement & Auto discharge facility.



11. Primary Injection test sets:

• High level of AC/DC current, typically primary current injection.
• Range from 1000 to 8000VA or Watt.
• Withstand max. current more tha 20,000 A.
• Able to inject upto 3.8KA (with 3kVA) indefinitely
• Voltmeter input Range: 0.2, 2 0r 20A ac/dc.
• Built-in Phase angle meter.
• Binary input. Voltage or dry contact.



12. CIRCUIT BREAKER TEST EQUIPMENT:

• Microhmmeter up to 800 amps.
• Coil Analyzers.
• Breaker Power Supply Unit.
• Circuit Breaker Analyzer & Timers.
• Dynamic resistance Measurement, Live Switchyard working, Advanced software & User friendly.



13. SF6 Breaker Analyzer/SF6 Leak Detection/ SF6 Gas Filling Cart/SF6 Gas Filling & recovery Unit- Compact size:
• SF6 Gas Filling & recovery Unit.
• SF6 IR Monitor.
• SF6 acidity meter.
• SF6 Gas recovery meter.
• SF6 gas Density Monitor cum pressure monitor.
• SF6 Gas density switch-High Voltage.
• SF6 gas density switch- Medium voltage.
• Sf6 Gas filling Cart.
• Filling cart with vaccum pump mini.

14. POWER QUALITY METER:
• Up to 0.06% of accuracy.
• Auto calibration technology.
• Class-A compliance to IEC 61000-4-30 power quality measurements.
• 10 Mhz transient recorder (up to 166,000 sample/cycle)
• Dual Ethernet port with secured IP address ( multiple RS485 port)
• Touch screen colour display
• IEC 61850 protocol server.
• Analog inputs for process measurements.
• Real time harmonics up to 128th order, THD, K-factor, Flicker, Phaser analysis.
• 1 GB+ storage capability providing years of data recording.



15. Synthetic Ester Oil-7131:
• Increased Fire safety.
• High Performance
• Asset life Extension
• Superior Moisture Tolerance
• Low maintenance
• UL Certified
• FM Global Approval Less Flammable Transformer Fluid.
• ATEX Certification
• Greater Environment Protection



16. Natural Ester Oil:

• MIDEL eN is a fire safe, natural ester – based dielectric fluid that has been specifically developed to offer a cost effective, safe alternative to traditional fluid and dry-type transformers. As well as having a high fire point, making it far more fire safe than mineral oil, MIDEL eN is also manufactured using renewable vegetable oil which provides a lower carbon footprint solution than mineral oil. In addition MIDEL eN is readily biodegradable, meaning that there is much less impact on the environment in the case of a leak or spillage.
• Flash Point to ISO 2719, 327˚C
• Fire Point to ISO 2592, 360˚C
• Specific heat at 20˚C 1848J/kg K
• Breakdown Voltage ≥ 75 kV
• Density at 20˚C 0.92kg/dm3

17. Motor Tester: This Instrument presents an exciting break-through in de-energised testing. Within minutes the operator can get a complete picture of the condition of the motor without having to stress-test the windings or use other more expensive or elaborate instruments, which can be difficult to operate and analyze captured data with.
Two tests in one. The instrument can be used in two modes: static and dynamic. Both quickly collect data in the auto mode and there is no need to operate a lot of difficult to understand buttons.