Kubler

Slip Rings: Slip Rings SR060E, SR085, SR085B, SRI085
In general slip rings are used to transmit power, signals or data, pneumatic and hydraulic, from a stationary to a rotating platform. The transmission between the stator and rotor takes place via sliding contacts and is extremely reliable.
• Transmission Paths: 20 load- or signal rings, Fieldbus
• Contact Combination: Copper/Bronze, silver/Precious metal
• Voltage Loading: 25A 240V AC/DC, 20A 400V AC/DC,16A 240V AC/DC, 10A 400V AC/DC.
• Speed: 800 min-1
• Rugged GFPC housing (glass-reinforced polycarbonate), 30% glass-fibre content for industrial usage.
• High vibration resistance.
• Long service life and long maintenance cycles.
• Fieldbus signals such as Profibus, CANopen etc. up to 12 Mbit/sec.
• Protection rating: IP50/IP64.
Position and Motion Sensors:

1. Encoders, Rotary:

• Incremental: Miniature Optical (15-26 mm), Miniature Magnetic(15-26 mm), Compact Optical(30-40 mm), Standard Optical(50-70 mm), Large Hollow shaft optic(90-120 mm), Heavy duty optic(90-120 mm)

• Absolute Single turn: Miniature magnetic(15-26 mm), Compact magnetic(30-40 mm), Compact Optical (30- 40 mm), Standard Optical (58-70 mm).

• Absolute Multi-turn: Compact magnetic(30-40 mm), Compact Optical(30-40 mm), Standard Optical(50-70 mm), Large hollow shaft/ optic/magnetic(90-120 mm).

2. Encoders, Bearing less: Incremental ᶲ 31-57,7 mm

3. Linear Measuring System: Magnetic Measurement system, Seilzugmechanik.

4. Inclinometers: 1-dimentional, 2-dimentional

Positioning and speed measurement for heavy cranes:

Availability 24 hours a day
Gantry cranes, container loading bridge cranes, stacking cranes,the requirements for automation and safety are increasing. Sendix encoders measure the position at the cable hoist, at the trolley, both on rails and on tyres, and at the spreader. Only these robust and safe measuring devices allow the automatic Position of containers.
Applications:
• Speed monitoring on the hoist, Monitoring of working areas on the main, hoist or the auxiliary hoist, Safety relays instead of limit switches,Two-axis synchronisation monitoring in tandem operation, Positioning of crane and cross travel (anti-collision) Monitoring of the whole drive train, comprising motor, drive, coupling and cable winch (speed ratio, gear backlash when reversing direction of rotation), Safe relay outputs as replacement for cam switches or limit switches, Safe speed switch.