Products  Hospital technology IEC 60364-7-710  Control modules for supply transfer systems with load swithes / circuit breakers in main distribution boards

Control modules for supply transfer systems with load swithes / circuit breakers in main distribution boards

Solutions for the structure of power supplies in safety power supply main distribution boards and upstream main distribution boards. Changeover and control module for use in accordance with DIN VDE 0100-710: 2002-11 para. 710.537.6.1 “Main distribution of the safety power supply source” and para. 710.537.6.2 “Main distribution boards”.

USC710D4-HA
	The factory-made control modules of the USC710D4-HA series are designed to control changeover and monitoring modules with load switches or circuit breakers. Load switches and circuit breakers are used as switching elements. In conjunction with the TMX-HA operator panel, also manual control of the changeover module is possible, e.g. for servicing purposes.
UMC710D4 / UMC710D4-HA / UMC710D4-E1
	The factory-made modules of the UMC710D4 series are designed to change over between two power supply sources (AV/SV resp. SV/UPS). They are available for currents up to 630 A. For higher currents, the control module USC107D4 with external power unit can be used. Status indication and alarm texts on the alarm indicator and operator units takes place via bus technology.
UMC108E
	The factory-made modules of the UMC108E-… series are designed to change over between two power supply sources, e.g. safety devices, safety lighting etc. Information exchange between the changeover equipment and the alarm indicator and operator units is established via bus technology. The module is suitable for mounting onto all common DIN rail systems (equipment racks have to be provided by the customer).
TMX-HA
	The TMX-HA alarm indicator and operator panel is used to select manual or automatic operating mode at the changeover equipment UMC…-HA or the control module USC…-HA. The panel is recommended to be installed in the cabinet door of the distribution board incorporating the changeover equipment. By means of a toggle switch manual or automatic mode can be selected. Indicator lights show the respective operating mode. In the manual mode, the respective line is switched on via the buttons On/Off.